SENECT MONITOR|4 100-240 VAC EU / Schuko (Type F)

SENECT MONITOR|4 100-240 VAC EU / Schuko (Type F)

SKU: 1100
GTIN: 4260494280036
Category: Control Units

Technical Specification
Dimensions:	191 x 140 x 60 mm
Power supply:	100 - 240 V AC, 50/60 Hz or 24 V DC
Sensor input ports:	4 x Sensor (compatible to all Senect sensors)
Output ports:	none
Ingress protection:	IP54
Data transmission:	2.4 GHz WLAN, remote access via dynamic DNS, port forwarding and IPv4
Shipping weight:	1.56 kg

Power Supply: 100-240 VAC

24 VDC Unfortunately, your selection is not available.
Mains Connector: EU / Schuko (Type F)

Switzerland (Type J)

Without Mains Connector Unfortunately, your selection is not available.

1.149,00 €

incl. 19% VAT , plus

Delivery time: 0 - 7 Workdays (DE - int. shipments may differ)

Wifi Monitoring Control Unit

Monitoring water quality in aquaculture with up to 4 sensors:
- ⇒ e.g. 1 x dissolved oxygen, 1 x pH, 1 x ORP, 1 x conductivity (temperature inclusive with O2S and conductivity sensors)
- ⇒ or 2 x water level and 2 x dissolved oxygen (for two ponds)
Free choice of SENECT sensors
Embedded barometer sensor
Data storage
Wireless data transmission via Wi-Fi – Remote access and alarming by and on your Android or iOS phone

Measure. Analyse. Alarm.

Example Pond Monitoring

Sensor port 1: Oxygen sensor O2S
Sensor port 2: pH sensor XR1
Sensor port 3: Water level sensor

Sensor port 4: ORP sensor XT1
Data evaluation & settings via Wi-Fi & App
Notifications via push message & e-mail

The SENECT System

A modular, decentralized control system:
- ⇒ Simple expansion of existing systems
- ⇒ Increased safety through small, distributed units
- ⇒ Inexpensive installation due to low cabling effort
Wireless data connection via Wi-Fi:
- ⇒ Updates via Wi-Fi: Install new features free of charge
- ⇒ Inexpensive installation: No network cables required

The SENECT Control App

The SENECT Control App is a software for smartphones, tablet-PCs and computer (PCs and Apple), with which the SENECT control units can be operated.

With the SENECT Control App the control units are connected with your wireless network and you can visualize sensor measurements and the status of the output ports live and receive alarm-messages.

Clearly arranged: Operation of all control units in one single software
Convenient: Perform actions (e.g. feeding), make settings
Informative: Graphical display of sensor measurements
Important: Receive alarm messages

For example, the SENECT Control App sends you an alarm via a push-message on your phone, if a parameter falls below its threshold or if the filter stops (emergency stop).

Everything at first sight: With the SENECT Control App you can see all sensor measurements and the status of the output ports (e.g. Solenoid valve on or off) clearly displayed on one page. So that you always keep track of your parameters and devices.

Benefit from the advantages of the SENECT Control App:

Linking-up your control units
Easy and clear visualization overview about measured parameters and output states
Receiving alarm messages on your mobile phone

The SENECT Control App requires access to the GPS of your mobile device (Android) to detect available Wi-Fi networks. No personal data is collected or stored.

Further information on this can be found in our privacy policy.

Overview of SENECT control units

* 2 x Water level sensors, 1 x Cover switch

Item information	Value
Item weight:	1,15 kg