Solenoid Brass Valve for automatic water regulation in aquaculture

Solenoid Valve for Water M12

SKU: 3010
GTIN: 4260494280302
Category: Actuators

Technical Specification
Dimensions:	93 (installation length) x 113 x 73 mm
Material:	Brass, sealing EPDM
Process connection:	G1" inner thread
Cable length:	5 m
Ingress protection:	IP67
Shipping weight:	1.57 kg

169,00 €

incl. 19% VAT , plus

Delivery time: 0 - 7 Workdays (DE - int. shipments may differ)

Always enough water - refilling with the M12 solenoid valve

Robust brass solenoid valve for refilling water
Normally closed
0.2 to 12 bar operating pressure
Ideal for the use in aquaculture

Automated water refill

The SENECT M12 solenoid valve is designed for installation in the water supply line and is connected to the actuator output of the SENECT control units. If one of our level probes detects that the water level is too low and therefore falls below the set threshold, an automatic refill can be set up using the M12 solenoid valve instead of an alarm, allowing for efficient regulation of optimal water levels.

Thanks to the use of brass, the valve is designed for an operating pressure of up to 12 bar. The M12 is normally closed – this prevents unwanted opening in the event of a power failure.

Wide range of applications

The automatic water replenishment by the M12 makes it possible to compensate for evaporation in large saltwater systems. It can also be used for controlled, measured value-dependent water supply for the operation of large filters. In aquaponics systems, it can be used for time-controlled water supply as part of an ebb and flow system. Manual remote control of the water supply via our app is another of the many possible uses of the M12 solenoid valve.