Control Cabinet 400V SWITCH|TWO

SKU: 3700
GTIN: 4260494280975
Category: Actuators

Technical Specification
Dimensions:	600 x 400 x 200 mm
Material:	Polykarbonat
Port:	400V CEE 16 A
5m connection cable to Senect actuator output :	2x
230V relay to connect 230VAC O2 solenoid valve	2x
Motor protection switch	2x
Terminal for 24VDC O2 solenoid valve	2x
FI circuit breaker	2x
400 VAC contactor	2x
16A CEE socket	2x
Phase monitor to monitor the supply voltage - Auxiliary switch for motor protection, FI and LS switch	1x

Control cabinet for control of 2x 400VAC oxygen input device: - 2x 5m connection cable to Senect actuator output - 2x motor protection switch - 2x 230V relay to connect 230VAC O2 solenoid valve - 2x terminal for 24VDC O2 solenoid valve - 2x FI circuit breaker - 2x 400VAC contactor - 2x 16A CEE socket - 1x phase monitor to monitor the supply voltage - Auxiliary switch for motor protection, FI and LS switch

3.790,00 €

incl. 19% VAT , plus

Description

Bring more reliability into your pond management with the SENECT control cabinet 400V SWITCH|TWO! The control cabinet 400VAC SWITCH|TWO offers you a plug & play solution to control and monitor your 400VAC oxygen input devices. Each CEE socket is individually fused: - Ground fault circuit interrupter - Line circuit breaker - Motor circuit breaker Each circuit breaker has an auxiliary switch so that tripping of a circuit breaker is detected and reported by the SENECT controller. In this way, a defective oxygen device can be detected at an early stage. Furthermore, each control cabinet contains a phase monitor to detect faults in the supply voltage: - Loss of a phase - Asymmetry of the phases - Incorrect connection of the phases The phase monitor is also monitored by the SENECT control system, so that this fault is also detected. The control cabinet also contains connection terminals for 230VAC and 24VDC solenoid valves, so that these can be switched simultaneously with the CEE sockets.