Pressure Sensor - Screw IN Version EPS

Item number: 2000

Hydrostatic water level measurements

Dimensions: Diameter 34 mm, length 85 mm
Material (medium-side): Stainless steel 316L, Ceramic-Membrane
Process connection: G1/2" outer thread
Range: 0 - 250 mbar
Accuracy: < 1% FS
Temperature: 0 - 40°C
Power consumption: << 1 W
Cable length: 5 m
Compatibility: with all SENECT control units
Ingress protection: IP 54 (outer part)

Category: Sensors




Water level sensor - EPS


  • Long-term stable hydrostatic measurements
  • Range 0 - 2.5 m water column (0 - 250 mbar)
  • Resistant against dirt
  • Virtual maintenance free
  • Ideal for the drum filter control

Exact repeatablity - even in dirty waters.

The SENECT water level sensor EPS measures the level of water based on the principle of hydrostatic pressure measurements.

Due to this method, the measurement is not influenced by dirt or biofouling. That´s why the EPS sensors are ideal for the use in drum or belt filter. There, the EPS sensor recognizes the water level changes induced by the filter mesh clogging and the filter control unit, which starts the flushing process.

Besides this typical application, the SENECT EPS sensor can be used for water level measurements in tanks including the refilling function. And since the sensor measures the pressure, the SENECT EPS can be used conrolling the functions of aerators e.g. in aquaculture biofilter aeration and mixing.

 

Use of the sensor with Senect Control App via a Senect Controller

 

 

Screenshot of Senect Control App - water level

 

The screenshot shows the visualisation of water level measurements. If a set threshold is short of or exceeded, water can be added automaticaly, by using a Solenoid valve, or an alarm can be triggered using one of the Senect Controllers.


Product weight: 0,35 Kg

Datasheet German

Datasheet English

Manual German

Manual English