SENECT AQUACULTURE CONTROL PRO - IoT Control System, App-controlled terminal for the automation of modern aquaculture. Controls water values by switching sensors and actuators.

SENECT AQUACULTURE|CONTROL PRO 150W without alarm output EU / Schuko (Type F)

SENECT AQUACULTURE|CONTROL PRO 150W without alarm output EU / Schuko (Type F)

SKU: 1500
GTIN: 4260494280142
Category: Control Units

Technical Specification
Dimensions:	265 x 254 x 127 mm
Power supply:	85 - 265 V AC, 47 - 63 Hz
Sensor input ports:	6 x Senect Sensors
Output ports:	1 x High-Power output 5 x Actuator outputs 3 x 230 V AC
Signals of the actuator outputs:	24 V DC PWM, 0 - 10 V, 4 - 20 mA
Ingress protection:	IP54
Data transmission:	802.11 b/g/n 2.4 GHz WLAN, remote access via dynamic DNS, port forwarding and IPv4
Shipping weight:	3.7 kg

Power Supply: 150W

300W
Alarm output: Without Alarm Output

With Alarm Output (potential-free contact)
Mains Connector: EU / Schuko (Type F)

Switzerland (Type J)

2.149,00 €

incl. 19% VAT , plus

Delivery time: 0 - 7 Workdays (DE - int. shipments may differ)

AQUACULTURE | CONTROL

Powerful. Clever. Connected.

6 x sensor plug: Every type of Senect sensor can be connected (e.g. oxygen, pH, ORP, water level, etc.)
5 x actuator outputs: with 24 V DC, 4 - 20 mA, 0 - 10 V
- ⇒ connectivity with PLC / SCADA systems
- ⇒ connection to actuators of other manufacturers (e.g. feeders or pumps, also via frequency converter) possible
- ⇒ available with a powerful 150 W or 300 W power supply
230 V AC output ports: with Schuko-plugs for controlling consumers like e.g. pumps or light directly
1 x High-Power: 24 V DC output port
All output ports are freely programmable, e.g. time- or sensor-controlled, but also in relation to other outputs
Intelligent automatic feeder and filter control
Wi-Fi: alarm notifications and remote control online

Example configuration - Drum- or belt filter control with oxygen regulation & monitoring

Sensor port 1: Water level sensor filter e.g. Water level probe PS
Sensor port 2: Water level sensor pond e.g. Water level probe PS
Sensor port 3: Oxygen sensor O2S
Sensor port 4: pH sensor XR1
Sensor port 5: ORP sensor XT1
Sensor port 6: Water level sensor pump sump e.g. Water level probe PS
Actuator port 1: Solenoid valve O2 M7 for oxygen injection
Actuator port 2: Solenoid valve for water M12 for automatic water refilling

High-Power output: 24 V DC filter motor
Actuator port 4: Power switch SC 24-230 to switch an oxygen concentrator
Actuator port 5: Power switch SC 24-230 to switch an ozone generator
Actuator port 6: Power switch SC 24-230 to switch a waste water pump
Mains outlet 1: Spray pump filter
Mains outlet 2: UV-C or 230 V AC filter motor
Mains outlet 3: Circulation pump
Data evaluation and settings via Wi-Fi and App
Notifications via push message and e-mail

The level sensor at sensor port 1 measures the water level in the filter and triggers a backwash of the filter depending on the water level. All cleaning parameters are configurable by the user (e.g. flush level, backwash duration, post-cleaning time).

The UV-C lamp at mains outlet 2 and the circulation pump at mains outlet 3 are switched off when the water level falls below the dry-running protection level (gravity-fed system) or exceeds the overflow protection level (pumped system), and are automatically switched on again when the level is back to normal.

App Screenshot: Recording of the water level in the pre-chamber of a pumped filter. The level rises until a cleaning is triggered. The level then drops rapidly due to backwashing of the filter.

The level probe at sensor port 2 measures the water level in the pond and opens the solenoid valve at output 2 to refill missing water.

Various functions are available (e.g. additional temporal addition, frost protection, max. duration, leakage detection).

App Screenshot: Recording of the water level in the pond. The level drops slowly until the solenoid valve is opened and the missing water is refilled.

An oxygen sensor is connected to sensor port 3. When the oxygen level falls below the set control switch-on point, the oxygen solenoid valve at actuator port 1 is opened, and the oxygen generator at actuator port 4 is switched on, to add oxygen until the desired saturation is reached.

When the oxygen level falls below the set lower alarm threshold, a notification is sent by push message and e-mail, and the alarm output (for models with alarm output) is switched.

With the help of the redox sensor at sensor port 5, the ozone generator and oxygen generator are switched on when the desired switch-on value is not reached.

The level probe at sensor port 6 monitors a pump sump and switches on a sewage pump to pump out the pump sump.

App Screenshot: Record of oxygen (blue) and temperature (yellow) over the last 8 hours.

App Screenshot Oxygen & Temperature history

Advantages of SENECT's intelligent filter control systems

Low maintenance & resource-saving

intensive cleaning program²
Eco Mode (saves up to 40% water)¹
automatic water refilling (with optionally available solenoid valve)¹

Safety

monitoring of water level and motor current (for 24 V DC motors)^1,2
alarm messages in case of errors on smartphone, tablet or PC
alarm also possible via warning lamp or as signal to PLC
remote access: view past actions, measured values and current status online

User-friendly

easy installation thanks to plug connectors
subsequent installation on almost every filter possible
operation directly on the device, or conveniently via tablet or PC

Clever software functions

Control of output ports also with time windows - e.g. control only active between 7 am and 6 pm
Time-controlled activation by choosing specific times or by selecting intervals
Sensor-based control of outputs, e.g. by setting thresholds
Activation of output in relation to other outputs (e.g. lifting skimmers before feeding)
Actuator outputs also usable for alarming (e.g. warning lamp, signal horn)
Intelligent automatic feeder control (also with calibration)
And much more!

Smart regulation, depending on water parameters

The SENECT System

A modular, decentralized control system:
- ⇒ Simple expansion of existing systems
- ⇒ Increased safety through small, distributed units
- ⇒ Cost-effective installation due to low cabling effort
Wireless data connection via Wi-Fi:
- ⇒ Updates via Wi-Fi: Install new features free of charge
- ⇒ Cost-effective installation: No network cables required

The SENECT Control App

The SENECT Control App is a software for smartphones, tablets and computers (PC and Mac) to operate the SENECT control units.

Clear: Operation of all control units in one single software
Convenient: Perform actions (e.g. feeding), adjust settings
Informative: Graphical display of sensor measurements
Important: Receive alarm notifications

By using the SENECT Control App, you integrate your SENECT control units into your Wi-Fi network. You can then adjust settings, trigger actions, receive alarm notifications, view live sensor readings, or save recorded data locally (PC version only) using your smartphone, tablet, or PC.

For instance, the SENECT Control App can notify you via push message and email in the event of an alarm, such as when the oxygen concentration drops below a set threshold or during a filter standstill (emergency stop).

With the SENECT Control App, you receive sensor values and the status of the respective devices (e.g., filter: last cleaning, or solenoid valve: on/off) to keep track of your system.

Benefit from the advantages of the SENECT Control App:

Adjust settings easily and conveniently
Keep track of water parameters even when you are on the go
Alarms when values fall below or exceed thresholds

The SENECT Control App requires access to the GPS of your mobile device (Android) to detect available Wi-Fi networks. No personal data is collected or stored.

Further information on this can be found in our privacy policy.

Overview of SENECT control units

* 2x water level sensor, 1 x lid switch

¹ Functions that are controlled by measuring the water level are only available if an optionally available SENECT level probe PS or the level sensor EPS is connected. These functions include: backwash trigger based on water level, emergency stop, Eco Mode, Dynamic Mode.

² Functions that require a controlled change of the motor speed are only available if the filter motor is connected via the 24 V DC output (OUT 3) or via the control of a frequency converter (for 230 V or 400 V filter motors). These functions include: intensive cleaning, soft start, manual speed change.

Item information	Value
Item weight:	2,60 kg