SENECT AQUACULTURE CONTROL PRO - IoT Control System, App-controlled terminal for the automation of modern aquaculture. Controls water values by switching sensors and actuators.

SENECT AQUACULTURE|CONTROL PRO 150W with alarm output Switzerland (Type J)

SENECT AQUACULTURE|CONTROL PRO 150W with alarm output Switzerland (Type J)

SKU: 1501-CH
Category: Control Units

Technical Specification
Dimensions:	265 x 254 x 127 mm
Power supply:	85 - 265 V AC, 47 - 63 Hz
Sensor input ports:	6 x Senect Sensors
Output ports:	1 x High-Power output 5 x Actuator outputs 3 x 230 V AC
Signals of the actuator outputs:	24 V DC PWM, 0 - 10 V, 4 - 20 mA
Ingress protection:	IP54
Data transmission:	802.11 b/g/n 2.4 GHz WLAN, remote access via dynamic DNS, port forwarding and IPv4
Item weight:	2.6 kg
Shipping weight:	3.7 kg

Power Supply: 150W

300W
Alarm output: Without Alarm Output

With Alarm Output (potential-free contact)
Mains Connector: EU / Schuko (Type F)

Switzerland (Type J)

2.799,00 €

incl. 19% VAT , plus

Delivery time: 2 - 9 Workdays (DE - int. shipments may differ)

AQUACULTURE | CONTROL

Powerful. Smart. Connected.

6 x Sensor inputs: Any type of SENECT sensors can be connected (e.g. Oxygen, pH, ORP, water level, etc.)
5 x Actuator outputs: with 24 V DC, 4 - 20 mA, 0 - 10 V
- ⇒ Coupling with PLC systems possible
- ⇒ Connection of third-party actuators such as feeders or pumps (also via frequency inverter) possible
- ⇒ High performance available with 150 W or 300 W power supply
230 V AC outputs: with safety sockets for controlling consumers such as pumps or lighting
1 x High-Power: 24 V DC output
All outputs are freely programmable, e.g. time- or sensor-controlled, as well as dependent on other outputs
Intelligent automatic feeder and filter control
Wi-Fi: Alarm notifications and online monitoring

With its 6 sensor inputs and a total of 9 actuator outputs, the SENECT|CONTROL PRO is specifically designed for industrial-scale facilities and the parallel monitoring of multiple tanks. As a modular control center, it enables the reliable monitoring of critical water parameters (oxygen, temperature, pH, etc.) as well as fail-safe 24/7 regulation of actuators such as automatic feeders, oxygen solenoid valves, and pumps – including automated emergency and alarm logic.

Example Configuration: Drum or Endless Belt Filter Control with Oxygen & Ozone Regulation and Monitoring

Sensor port 1: Level Probe Filter, e.g. Level Probe PS
Sensor port 2: Level Probe Tank/Pond, e.g. Level Probe PS
Sensor port 3: Oxygen Sensor O2S
Sensor port 4: pH Sensor XR1
Sensor port 5: Redox Sensor XT1
Sensor port 6: Level Probe Pump Sump, e.g. Level Probe PS
Actuator port 1: Solenoid Valve O2 M7 for oxygen injection
Actuator port 2: Solenoid Valve M12 for automatic water refill

High-Power output: 24 V DC Filter Motor
Actuator port 4: Power Switch SC 24-230 for switching an oxygen concentrator
Actuator port 5: Power Switch SC 24-230 for switching an ozone generator
Actuator port 6: Power Switch SC 24-230 for switching a wastewater pump
Safety socket 1: Filter rinse pump
Safety socket 2: UV-C or 230 V AC filter motor
Safety socket 3: Circulation pump
Data analysis & settings via Wi-Fi & App
Event notifications via push message & e-mail

The level probe at sensor port 1 measures the water level in the filter and triggers filter backwashing depending on the water level. All cleaning parameters can be configured individually (e.g. rinsing level, cleaning duration, post-cleaning time).

The UV-C lamp and socket 2 as well as the circulation pump at socket 3 are switched off when the level drops below the dry-run protection level (gravity system) or exceeds the overflow protection level (pumped system), and are automatically switched back on as soon as the level returns to target.

App Screenshot: Water level recording in the inlet chamber of a pumped filter. The level rises until a cleaning cycle is triggered. By backwashing the filter, the level drops rapidly afterwards.

Via sensor port 2, the level probe measures the pond/tank water level and automatically activates the solenoid valve at output 2 to refill water when the level is too low.

Various automated functions are available (e.g. additional timed refill, frost protection, max. duration, leak detection).

App Screenshot: Water level recording in the pond. The level drops slowly until the solenoid valve opens and refills the missing water.

An Oxygen Sensor is connected to sensor port 3. If the level drops below the set oxygen control setpoint, the Oxygen Solenoid Valve at actuator port 1 is opened and the oxygen generator at port 4 is switched on to supply oxygen until the desired saturation is reached.

If the value drops below the lower alarm threshold, an instant notification is sent via push message and e-mail, and the alarm output (on models with alarm output) is triggered.

Using the Redox Sensor at sensor port 5, the ozone generator and oxygen generator are switched on whenever the redox reading drops below the setpoint.

The Level Probe at sensor port 6 monitors a pump sump and activates a wastewater pump to drain the pump sump.

App Screenshot: Recording of dissolved oxygen (blue) and temperature (yellow) over the last 8 hours.

App Screenshot Oxygen & Temperature Curve

Advantages of SENECT's Intelligent Filter Control Algorithms

Low Maintenance & Efficient

The intensive cleaning program²
Eco Mode (up to 40% water savings)¹
Automatic water refill (with optionally available solenoid valve)¹

Safety

Monitoring of water level and motor current (for 24 V DC motors)^1,2
Alarm notifications in case of faults to smartphone, tablet, or PC
Alarm also possible with warning beacon or as a signal to PLC
Remote access: Complete history of past actions, sensor values, and current system status online

User-Friendly

Plug & play installation thanks to quick-connect plugs
Retrofitting possible on virtually any filter system
Direct on-device operation or conveniently via tablet, PC, or smartphone

Clever Software Functions

Output control also always possible with specification of a time window, e.g. regulation only active from 7:00 to 18:00
Timer control with specification of individual times or intervals
Sensor-based control, e.g. via threshold setpoints
Control depending on another output (e.g. lift surface skimmer before feeding)
Actuator outputs can also be configured as alarm outputs (e.g. warning beacon, horn)
Intelligent feeder control (e.g. including dosage calibration)
And much more!

The SENECT System

A modular, decentralized control system:
- ⇒ Easy expansion of existing aquaculture facilities
- ⇒ Increased reliability and safety through decentralized, distributed units
- ⇒ Cost-effective installation due to minimal cabling effort
Wireless data connectivity via Wi-Fi:
- ⇒ Firmware updates via Wi-Fi: Install new features free of charge
- ⇒ Economical installation: No network cables required

SENECT system with wireless data transmission

The SENECT Control App

The SENECT Control App enables simple and flexible operation of all SENECT control units – via PC, Mac, tablet, or smartphone.

Clear: Operation of all control units in a single software application
Convenient: Execute actions (e.g. feeding), adjust parameters and setpoints
Informative: Graphical visualization of live and historical sensor data
Crucial: Instant receipt of push alarm notifications

With the SENECT Control App, you integrate your SENECT control units directly into your local Wi-Fi network. This allows you to configure settings, trigger manual actions, receive instant alarm alerts, inspect sensor readings in real time, or log historical data locally (PC version).

For example, the SENECT Control App immediately alerts you via push notification and e-mail if critical thresholds are violated – such as dissolved oxygen falling below target or filter standstill (emergency stop).

You can continuously monitor live sensor readings and actuator states (e.g. filter: last cleaning time, solenoid valve: ON / OFF) to maintain full operational control of your aquaculture facility.

Benefit from the advantages of the SENECT Control App:

Simple and convenient configuration of settings
Always keep an eye on water parameters – even remotely while on the go
Instant alarm notifications when threshold values are exceeded or undershot

The SENECT Control App requires access to your mobile device's GPS (Android) to detect available Wi-Fi networks. No personal data is collected or stored.

Further information can be found in our Privacy Policy.

Overview of SENECT Control Units

* 2x water level sensor, 1x lid switch

¹ Functions controlled by water level measurement are only available when connecting an optionally available SENECT Level Probe PS or Level Sensor EPS. These functions include: level-based cleaning trigger, emergency shut-off, Eco Mode, Dynamic Mode.

² Functions requiring controlled adjustment of motor speed are only available when connecting the filter motor via the 24 V DC output (OUT 3) or via frequency inverter control (for 230 V or 400 V filter motors). These functions include: intensive cleaning, soft start, manual speed adjustment.

Item information	Value
Country of origin:	Germany
Scope of Application:	Koi Pond & Garden Pond Aquaculture Recirculating Aquaculture Systems (RAS)Research and Conservation Breeding: Institutes and Universities Public Aquariums and Zoos Aquaponics and Hydroponics Swimming ponds and eco pools Freshwater Saltwater
Remote Access via Wi-Fi:	Wi-Fi, SENECT App & Worldwide Remote Access
Purpose:	Oxygen Dosing / Emergency Aeration Automatic Water Refill (Level Balancing)Automatic Feeding Realtime Water Monitoring Switching 230V Actuators Emergency Alert with physical Alarm Output Digital Emergency Alert
Dimensions:	265 x 254 x 127 mm
Power Plug Type:	Switzerland (Type J)
Switching Capacity (Output port):	150 W
Ingress protection:	IP54 (splash-proof)
Sensor inputs:	6
Actuator Outputs:	5 Actuator Outputs, 1 High-power Output, 3 230V AC Outputs
Power Supply:	85 - 265 V AC, 47/63Hz
Material:	Polycarbonate (impact and UV-resistant)
Product Type:	Aquaculture Control / Measurement and Control Unit