SENECT AQUACULTURE|CONTROL BASIC - IoT Aquaculture, Pond & Pool Measurement and Control System, App-controlled terminal for the automation of modern aquaculture. Controls water values by switching sensors and actuators.

SENECT AQUACULTURE|CONTROL BASIC 150W with alarm output EU / Schuko (Type F)

SENECT AQUACULTURE|CONTROL BASIC 150W with alarm output EU / Schuko (Type F)

SKU: 1401
GTIN: 4260494280111
Category: Control Units

Technical Information
Dimensions:	265 x 254 x 127 mm
Power supply:	85 - 265 V AC, 47 - 63 Hz
Sensor inputs:	3 x Senect Sensors
Outputs:	1 x High-Power output 2 x Actuator outputs 3 x 230 V AC
Protection class:	IP54
Data transmission:	802.11 b/g/n 2.4 GHz Wi-Fi, remote access via Dynamic DNS, port forwarding and IPv4
Item weight:	2.3 kg
Shipping weight:	3.4 kg

Power Supply: 150W

300W
Alarm output: Without Alarm Output

With Alarm Output (potential-free contact)
Mains Connector: EU / Schuko (Type F)

Switzerland (Type J)

1.849,00 €

incl. 19% VAT , plus

Delivery time: 2 - 9 Workdays (DE - int. shipments may differ)

AQUACULTURE | CONTROL

Powerful. Smart. Connected.

3 x Sensor inputs: Any type of SENECT sensors can be connected (e.g. O₂, water level, etc.)
2 x Actuator outputs: with 24 V DC, 4 - 20 mA, 0 - 10 V
- ⇒ Connection to PLC systems possible
- ⇒ Connection of third-party actuators such as feeders or pumps possible
- ⇒ Powerful: available with 150 W or 300 W power supply unit.
230 V AC outputs: with safety sockets (Schuko) for direct control of loads such as pumps or lighting
1 x High-Power: 24 V DC output
All outputs are freely programmable (e.g. time- or sensor-controlled, or dependent on other outputs)
Intelligent feeder and drum filter control
Wi-Fi: Online monitoring and alarm notifications

Example Configuration: Drum Filter or Endless Belt Filter Control with Oxygen Regulation & Monitoring

Sensor Port 1: Filter water level probe, e.g. Level Probe PS
Sensor Port 2: Tank water level probe, e.g. Level Probe PS
Sensor Port 3: Oxygen Sensor O2S
Actuator Port 1: Solenoid Valve O2 M7 for oxygen supply
Actuator Port 2: Water Solenoid Valve for automatic water replenishment

High-Power Output: 24 V DC filter motor
Socket 1: Filter rinsing pump
Socket 2: UV-C or 230 V AC filter motor
Socket 3: Circulation pump
Data evaluation & settings via Wi-Fi & App
Event notifications via push message & email

The water level probe at Sensor Port 1 measures the water level inside the filter and triggers filter backwashing depending on the water level height. All cleaning parameters can be configured individually (e.g. backwash level, cleaning duration, post-cleaning time).

The UV-C lamp at Socket 2 and the circulation pump at Socket 3 are switched off if the level drops below the dry-run protection threshold (gravity system) or exceeds the overflow protection threshold (pumped system), and automatically switch back on once the water level returns to the target range.

App Screenshot: Recording of the water level in the inlet chamber of a pumped filter. The level rises until a cleaning cycle is triggered. Backwashing the filter then quickly lowers the water level.

The water level probe at Sensor Port 2 measures the water level in the tank/pond and opens the solenoid valve at Output 2 to refill missing water.

Various functions are available (e.g. additional timed dosing, frost protection, maximum duration, leak detection).

App Screenshot: Recording of the water level in the pond. The level gradually drops until the solenoid valve opens and replenishes the missing water.

An oxygen sensor is connected to Sensor Port 3. When the level drops below the configured oxygen regulation threshold, the oxygen solenoid valve at Actuator Port 1 opens and supplies oxygen until the desired saturation is reached.

If the level drops below the lower alarm threshold, a notification is sent via push message and email, and on models with an alarm output, the relay is activated.

App Screenshot: Recording of dissolved oxygen (blue) and temperature (yellow) over the last 8 hours.

App Screenshot Oxygen & Temperature Curve

Advantages of Intelligent Filter Control Systems by SENECT

Low-Maintenance & Economical

Intensive cleaning program²
Eco Mode (up to 40% water savings)¹
Automatic water refill (with optionally available solenoid valve)¹

Safety & Reliability

Water level and motor current monitoring (for 24 V DC motors)^1,2
Alarm notifications in case of errors sent to smartphone, tablet, or PC
Alarming also possible via warning lamp or signal to PLC
Remote access: Online view of past actions, measured values, and current status

User-Friendly

Simple installation thanks to plug-in connectors
Retrofit installation possible on virtually any filter
Operation directly on the device or conveniently via tablet or PC

Clever Software Functions

The control outputs can be time-controlled – for example, allowing regulation only between 7:00 and 18:00
Timer control specifying individual points in time or intervals
Sensor-based control (e.g. via threshold setpoints)
Control dependent on another output (e.g. raising a skimmer before feeding)
Actuator outputs can also be used as alarm outputs (e.g. warning lamp, horn)
Intelligent automatic feeder control (e.g. with dosage calibration)
And much more!

A modular, decentralized control system:
- ⇒ Easy expansion of existing aquaculture facilities
- ⇒ Increased reliability and safety through decentralized, distributed units
- ⇒ Cost-effective installation due to minimal cabling effort
Wireless data connectivity via Wi-Fi:
- ⇒ Firmware updates via Wi-Fi: Install new features free of charge
- ⇒ Economical installation: No network cables required

SENECT system with wireless data transmission

The SENECT Control App

The SENECT Control App enables simple and flexible operation of all SENECT control units – via PC, Mac, tablet, or smartphone.

Clear: Operation of all control units in a single software application
Convenient: Execute actions (e.g. feeding), adjust parameters and setpoints
Informative: Graphical visualization of live and historical sensor data
Crucial: Instant receipt of push alarm notifications

With the SENECT Control App, you integrate your SENECT control units directly into your local Wi-Fi network. This allows you to configure settings, trigger manual actions, receive instant alarm alerts, inspect sensor readings in real time, or log historical data locally (PC version).

For example, the SENECT Control App immediately alerts you via push notification and e-mail if critical thresholds are violated – such as dissolved oxygen falling below target or filter standstill (emergency stop).

You can continuously monitor live sensor readings and actuator states (e.g. filter: last cleaning time, solenoid valve: ON / OFF) to maintain full operational control of your aquaculture facility.

Benefit from the advantages of the SENECT Control App:

Simple and convenient configuration of settings
Always keep an eye on water parameters – even remotely while on the go
Instant alarm notifications when threshold values are exceeded or undershot

The SENECT Control App requires access to your mobile device's GPS (Android) to detect available Wi-Fi networks. No personal data is collected or stored.

Further information can be found in our Privacy Policy.

Controllers compared

Connections, power supply ratings and enclosure protection of our monitoring and control systems.

Technical specifications of SENECT|ONE, SENECT|TWO, MONITOR|FOUR, FILTER CONTROL, AQUACULTURE|CONTROL BASIC and AQUACULTURE|CONTROL PRO.
Specifications	SENECT\|ONE	SENECT\|TWO	MONITOR\|FOUR	FILTER CONTROL	AQUACULTURE\|CONTROL BASIC	AQUACULTURE\|CONTROL PRO
Sensor inputsMonitoring	1	2	4	3*	3	6
Actuator outputsControl	3	2	–	2	2	5
High-power output24-V-DC	–	–	–	1	1	1
230-V outputsMains voltage	–	–	–	3	3	3
Power supply ratingWatts (details)	60 W	60 W	15 W	150 / 300 W	150 / 300 W	150 / 300 W
IP ratingEnclosure protection	IP54	IP54	IP54	IP54	IP54	IP54

– = not available. Inputs and outputs: number of connections.

Supported: Level probes, pressure sensors and temperature sensors

Not supported: Oxygen, pH, ORP (redox) and conductivity sensors

Power supply rating and high-power output

The power supply rating is relevant to the high-power output (24 V DC).

For endless belt filters and drum filters with a higher-power 24 V DC motor, we recommend the 300 W power supply.

Item information	Value
Country of origin:	Germany
Power Plug Type:	Schuko (Typ F) - EU
Scope of Application:	Koi Pond & Garden Pond Aquaculture Recirculating Aquaculture Systems (RAS)Research and Conservation Breeding: Institutes and Universities Public Aquariums and Zoos Aquaponics and Hydroponics Swimming ponds and eco pools Freshwater Saltwater
Remote Access via Wi-Fi:	Wi-Fi, SENECT App & Worldwide Remote Access
Dimensions:	265 x 254 x 127 mm
Purpose:	Automatic Water Refill (Level Balancing)Automatic Feeding Operation / Control of a Drum Filter Realtime Water Monitoring Switching 230V Actuators Emergency Alert with physical Alarm Output Digital Emergency Alert
Switching Capacity (Output port):	150 W
Ingress protection:	IP54 (splash-proof)
Sensor inputs:	3
Power Supply:	85 - 265 V AC, 47/63Hz
Material:	Polycarbonate (impact and UV-resistant)
Product Type:	Aquaculture Control / Measurement and Control Unit