SENECT|TWO 100-240 VAC EU / Schuko (Type F)

SENECT|TWO 100-240 VAC EU / Schuko (Type F)

SKU: 1600
GTIN: 4260494280548
Category: Controller

Dimensions:	191 x 140 x 90 mm
Supply voltage:	100 - 240 V AC, 50/60 Hz
Sensor-Input ports:	2 x Universal-sensor input (compatibel with all SENECT sensors)
Outputs:	2 x Actuator-output ports
Ingress protection:	IP54
Data transmission:	2.4 GHz WLAN, remote access via dynamic DNS, port forwarding and IPv4

Power Supply: 100-240 VAC

24 VDC Unfortunately, your selection is not available.
Mains Connector: EU / Schuko (Type F)

Switzerland (Type J)

Without Mains Connector Unfortunately, your selection is not available.

1.049,00 €

incl. 19% VAT , plus

Delivery time: 5 - 7 Workdays (Other countries)

Description
Manual (2)

Multifunctional Aquaculture Controller

One controller for all:

Monitoring and regulating of one parameter (e.g. oxygen)
Two sensor input ports, two output ports
One controller for many functions:
- Measuring with two sensors (e.g. oxygen in 2 tanks)
- Many output port functions: e.g. sensor-control, time-control, automatic fish feeder, light
- Online access and surveillance
Versatile - perfectly suited for ponds, raceways, mesocosms and recirculating aquaculture systems (RAS)
Scalable and combineable: many units can be combined to one software system
Wireless data transmission via WLAN - Remote access and alarm via smartphone
Easy DIY installation - easy operation

2 x measurement & control.

Example: Oxygen regulation of two tanks and monitoring

Sensor Plug 1: Oxygen sensor O2S
Sensor Plug 2: 2nd Oxygen-Sensor O2S / pH sensor / ORP-Electrode / Water level sensor
Actuator Plug 1: Oxygen valve
Actuator Plug 2: 2nd Oxygen Valve MVO / Feeder / Alarm lamp
Data evaluation & settings via WLAN & App
Notifications via push message & E-Mail

Clever regulation of aeration

Measurement of the oxygen concentration with the low-maintenance and long-term stable optical SENECT O2-Sensor O2S.
If the oxygen concentration sinks below a treshhold, an aerator or solenoid valve depending on the aeration mode is switched on (24 v DC devices directly, 230 V AC devices via the optional Power Switch)
Multiple regulations are possible! For example, if the oxygen concentration falls below 70% saturation, an aerator is switched on. If the oxygen concentration falls further to less than 60%, additionally technical oxygen supply is switched on via a solenoid valve.

SENECT|TWO - Cost saving, ressource-efficient and versatile.

Automatic feeder control

All typical feeders can be connected (AC feeders via the optional Power Switch)
Intelligent control of feed portion and timing
- Fixed feeding times (e.g. 8:00, 9:00, and so on for always 30 s)
- In intervalls (e.g. from 7 a.m. to 7 p.m. every 30 min for 15 s)
- Calibration –> Display in gramm
Intelligent control based on environmental parameters (in combination with sensors)
- No feeding if oxygen is critical (e.g. below 70%)
- Temperature depending feeding
- No feeding in relation to atmospheric pressure
- Switching on outputs prior to feeding (e.g. increasing O2 before feeding, switching on lights)
Setting programable directyl on the SENECT|TWO of via smartphone, tablet or PC

Intelligent feeding algorithms - based on environmental parameters.

Installation

Easy and cost-effective
No data cables - saves costs and diminishes failure causes
Only a power supply necessary

Mounting. Plugging connectors in. Define the settings. - Ready!

The SENECT System

A modular, decentralized control system:
- Simple expansion of existing plants
- Increased safety through small, distributed units
- Inexpensive installation due to low cabling effort
Wireless data connection via WLAN
- Updates via WLAN: Install new features free of charge
- Inexpensive installation: No network cables necessary

The SENECT Control App

The SENECT Control App is a software for smartphones, tablet-PCs and computer (PCs and Apple), with which the SENECT control units can be operated.

With the SENECT Control App the control units are connected with your wireless network and you can visualize sensor measuments and the status of the output ports live and receive alarm-messages.

For example, the SENECT Control App sends you an alarm via a push-message on your phone, if a parameter falls below its treshold or if the filter stops is in the emergency stop mode.

Everything at first sight: With the SENECT Control App you can see all sensor measurements and the status of the output ports (e.g. solenoid valve on or off) clear displayed on one page. So that you always keep track of your parameters and devices.

Benefit from the advantages of the SENECT Control App:

Linking-up your control units
Easy and clear visualization overview about measured parameters and output states
Receiving alarm messages on your mobile phone

Download the SENECT Control App for Android, iOs or Windows devices.

Now available at the Google Playstore, App Store or here.

The SENECT Control App needs to detect the available WLAN networks the permission to use the location service of your device. No personal data will be saved or used.

More informations are in our privacy policy.

Overview SENECT Controller

* 2 x Water level sensors, 1 x Cover switch

Item weight:	1,33 kg

Manual German

Manual German

Manual English

Manual English